Electrolytic determination of nanomolar concentrations of silver in solution with a piezoelectric quartz crystal

Silver in solution is determined in situ by the frequency change of a piezoelectric quartz crystal on electrodeposition on the electrode of the crystal. The electrolyte solution flows through a cell containing the platinum-plated electrode (cathode) of the quartz crystal, a coiled platinum-wire anode and a silver—silver(I) chloride reference electrode, and is electrolyzed at —0.2 V vs. $\text{Ag}\text{AgCl}$. The frequency change is proportional to the silver concentration in the range 10^-5–5 × 10^-7 M after electrodeposition for 5 min, and in the range 10^-8–10^-9 M by recycling 20 ml of the solution over the electrodes for 3 h.     

Gas permeation through hydrogels : I. Gel cellophane membranes

Permeabilities and diffusion coefficients of various gases, Ar, N₂, O₂, CO₂, CH₄, C₂H₄, C₃H₈ and C₄H₁₀, were measured for Water-swollen gel cellophane membranes. No dependence of permeabilities on gas pressure below 1 atm was found. It was observed that the permeability coefficients were not related linearly to the coefficients in bulk water. For the two states of water in the membrane, an analytical method is presented to estimate the diffusion coefficients and the solubilities in free water and non-freezing water. It was found that the diffusion coefficients in non-freezing water were lower than those in free water, and the solubilities in non-freezing water were higher than in free water for all gases studied except CO₂ and C₂H₄, which gave reverse results.     

Coupling of numerical Green''s matrix and boundary integral equations for the elastodynamic analysis of inhomogeneous bodies on an elastic half-space

A coupled system of integral equations (of the domain and boundary types) is formulated for the elastodynamic response analysis of a locally inhomogeneous body on a homogeneous elastic half-space. The method uses the fundamental solution for homogeneous elastostatics in the inhomogeneous domain owing to the lack of a fundamental solution in inhomogeneous elastodynamics.

The integral representation of displacements in the inhomogeneous domain is formulated with the help of this elastostatic fundamental solution by considering the term induced by the inhomogeneity of materials and the acceleration term as the body force term. Then the Green's matrix is obtained numerically from this integral representation and combined with the ordinary boundary integral equations, which are valid in the exterior homogeneous half-space.

Some numerical examples show the efficiency and the versatility of this coupled method.     

Application of arsenic to electrophotoreceptors

Arsenic has been applied to many electronic devices such as electrophotoreceptors, gallium arsenide (GaAs) semiconductors and solid-state image pickup devices. For electrophotoreceptors selenium–arsenic (Se? As) alloys are coated onto the conductive substrate of the receptors. Arsenic is mostly used in electophotoreceptors in electronic devices. During the coating process, a part of the gaseous arsenic is released through an exhaust system. In order to avoid arsenic being discharged to the atmosphere, bag filters and high-efficiency particulate air filters are set before the exhaust port. Any arsenic which still exists in the waste water after washing tools and jigs from the coating process is collected by sedimentation before discharging. The Ames salmonella/microsome plate test for As₂Se₃ indicated no mutagenic activity under the test system used. For the safety of workers engaged in arsenic-related jobs, they received a medical examination once every six months. No negative trends from the examination was found in 428 men who received the examination from Autumn 1980 to Spring 1987.     

Organogel of an 8-quinolinol platinum(II) chelate derivative and its efficient phosphorescence emission effected by inhibition of dioxygen quenching

A newly synthesized 8-quinolinol platinum(II) chelate derivative gelates various organic solvents, and the gel formed shows unique thermo- and solvatochromism of visible and phosphorescent colour in response to a sol-gel phase transition and possesses an attractive ability to inhibit dioxygen quenching of excited triplet states.     

An efficient synthesis of 3-aminoisothiazolo[5,4-b] -quinoline from quinoline

Treatment of readily available 3-formylquinoline-2-thiol ( 1 ) with ammoniacal sodium hypochlorite directly afforded isothiazolo[5,4-b]quinoline ( 3 ) in high yield, probably via 3-formylquinoline-2-sulfenamide ( 2 ). Facile conversion of 3 to the corresponding 3-amino derivative ( 7 ) was accomplished by the following sequence: base induced opening of the isothiazole ring to 3-cyanoquinoline-2-thiol ( 5 ), oxidation of 5 to the corresponding stable sulfenamide ( 6 ) and sodium ethoxide catalysed reclosure of the isothiazole ring which provided 3-aminoisothiazolo[5,4-b]quinoline ( 7 ).     

Study of decay mechanisms in B--->Lambdac+ppi- decays and observation of low-mass structure in the Lambdac+p system

Using a sample of 152 x 10(6) BB pairs accumulated with the Belle detector at the KEKB e+e- collider, we study the decay mechanism of three-body charmed decay B- --> Lambdac+ ppi-. The intermediate two-body decay B--->Sigmac (2455)0 p is observed for the first time with a branching fraction of (3.7 +/- 0.7 +/- 0.4 +/- 1.0) x 10(-5) and a statistical significance of 8.4sigma. We also observe a low-mass enhancement in the (Lambdac+p) system, which can be parametrized as a Breit-Wigner function with a mass of (3.35(-0.02)(+0.01) +/-0.02) GeV/c2 and a width of (0.07(-0.03)(+0.04) +/-0.04) GeV/c2. We measure its branching fraction to be (3.9(-0.7)(+0.8) +/- 0.4 +/- 1.0) x 10(-5) with a statistical significance of 6.2sigma. The errors are statistical, systematic, and that of the Lambdac+-->pK- pi+ decay branching fraction.